UT200A+ clamp meter manufactured by UNI-T.
Automatic range selection (except current measurement modes) and auto power-off mode.
Maximum cable diameter enclosed by the clamp jaws: 27 mm.
Display type: LCD, 1999 counts, display update rate 3 times per second.
Measurement functions:
- DC and AC voltage (contact method, via test probes)
- AC current (non-contact method)
- resistance measurement
- audible continuity test "for open circuit" (if the resistance of the circuit under test is less than 10 Ohm)
- diode test (p-n junction check)
Measurement range selection - automatic.
Additional functions:
- display reading hold (Data Hold)
- sleep mode (auto power-off after a long period without measurements)
- low battery indicator
Maximum diameter of measured cable 27 mm.
DC voltage measurement range (with probes) DCV: 600 V ±(1%+3)
AC voltage measurement range (with probes) ACV: 600V ±(1.5%+5)
AC CURRENT measurement ranges (non-contact) ACA: 20A/200A/200A ±(1.5%+5)
Resistance measurement R: 20 kOhm ±(1%+4)
Power: 9V battery, 6F22 ("Krona" type)
Included accessories: soft case for carrying and storage, test leads.