Heating element for 907-type soldering irons from all manufacturers, with built-in thermocouple.
Built-in temperature sensor type: thermocouple.
The heating element is nichrome wire in a ceramic sheath.
Modified heater: the ceramic heater rod is placed in a metal sleeve for better thermal conductivity and mechanical strength.
Fully interchangeable in mounting dimensions with similar ceramic heaters.
Attention! The photo shows a heater with a stop flange. The version on sale is without a stop flange, i.e. just a cylindrical rod. This is a more versatile design, since a heater with a flange does not fit into some 907 soldering iron handles.
Specifications:
length: 60 mm
diameter: 3.9 mm.
built-in temperature sensor type: thermocouple.
In a working element, the resistance between the heater leads is 11-15 Ohm, and the resistance between the thermocouple leads is about 0.5 Ohm.
Attention! This heater must not be installed in soldering irons for stations designed to work with a HAKKO-1321 type heater. This is due to incompatible temperature sensors.
The HAKKO-1321 heater uses a thermistor.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown