Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
RTS-type ceramic heater without temperature sensor.
For soldering irons powered from a 220V network and a design for tips of the series 900M, like many soldering stations.
Warming up of such a heater to operating temperature occurs much faster than that of a soldering iron with a heater made of nichrome wire. In addition, the characteristic of the PTC element ensures self-stabilization of temperature.
Characteristics:
rated power: 30W
supply voltage: 220 V
Resistance: 910-920 Ohm (cold)
diameter: 3.8 mm
length: 60 mm
number of pins: 2 pcs
Attention! Do not use this heater in soldering irons without a power regulator! At a nominal network voltage of 220V, this leads to overheating up to 580-600°C.
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown
![CXG soldering iron heater A1623-220V [PTC ceramic, 30W, 220V without sensor]](/files/pic/tools/lukey/045803/045803-1-s.jpg)
![CXG soldering iron heater A1623-220V [PTC ceramic, 30W, 220V without sensor]](/files/pic/tools/lukey/045803/045803-1-b.jpg)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
