The XR2206 is a simple yet versatile function generator of sine, triangle and square waves from 1Hz to 1MHz. Easy to assemble, control and use. The kit is ideal for experiments and as a tool for radio amateurs and students. Assembly requires skills in building electronic devices and soldering PCBs.
The signal generator is based on the XR2206 chip. Module supply voltage 9 to 12V, output amplitude up to 3V (sine/triangle) and 8V square wave.
The frequency is set with two potentiometers, Coarse and Fine. The frequency range is selected with a jumper.
Frequency ranges:
1-10 Hz
10-100 Hz
100 Hz - 3 kHz
3 kHz - 65 kHz
65 kHz - 1 MHz
Terminal block pinout:
GND - ground
SQU - square wave output
SIN / Tri - sine or triangle waves. The waveform is selected with the Tri / Sin jumper
The output amplitude of the sine and triangle waves is adjusted with the Amp potentiometer. The square wave amplitude is fixed.
Main specifications:
Chip: XR2206
Supply voltage: 9-12 V
Frequency range:1Hz - 1MHz
Output amplitude (sine/triangle): 0-3 V
Output amplitude (square): 8 V
Output impedance:600 Ohm + 10%
Overall dimensions:72x54x17 mm
Sine wave:
Amplitude: 0 - 3V
Distortion: less than 1% (at 1 kHz)
Flatness: + 0.05dB 1Hz - 100 kHz
Square wave:
Amplitude: 8V (no load)
Rise time: less than 50 ns (at 1 kHz)
Fall time: less than 30 ns (at 1 kHz)
Symmetry deviation: less than 5% (at 1kHz)
Triangle wave:
Amplitude: 0 - 3V
Linearity deviation: less than 1% (up to 100 kHz) 10mA
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown