Module Sine wave PWM EGS002 EG8010A Купить в интернет-магазине

Шановні клієнти інтернет-магазину!

У зв'язку зі святкуванням Нового Року ми працюємо за наступним графіком:
• з 31.12.24(Вт) по 02.01.25(Чт) не працюємо
• з 03.01.25(Пт) працюємо в звичайному режимі.

Інтерет-магазин приймає замовлення цілодобово 24/7 !

Module Sine wave PWM EGS002 EG8010A

Pure sine inverter module EG8010A EGS002

NOT available.

Expected price: 228,90 UAH

from 1 pc :	—	228,90	UAH
from 10 pcs :	—	217,50	UAH	( -5,0%)
from 50 pcs :	—	194,60	UAH	( -15,0%)

Prices are indicated at the time of product availability and may change upon receipt

Current balances:

NOT available

Description
Images
Documentation
See also
Feedback-Questions

Technical documentation

Файл с описанием (4295Kb)

Изображение товара

Product description format_size zoom_out zoom_in

This module can be used to build a 1-10 kW inverter, a frequency converter for a single phase motor, to repair factory devices based on this module, or to upgrade converters with a modified sine wave. The board will allow you to quickly and easily assemble a 12/220 inverter in a bridge circuit with a pure sine at the output. The board has onboard IR2110 (IR2113 or analog) key management drivers and an EG8010A controller. The power section must be assembled separately, depending on the purpose of the device.

Key Features:

Digital part supply voltage:+5V
Driver supply voltage:+12-20V
PWM frequency: 23.4KHz
Controller clock frequency: 12MHz
Possibility to set fixed frequency values of 50Hz and 60Hz
Smooth frequency change, two modes 0-100Hz and 0-400Hz
MOSFET dead time setting, 4 fixed values 300nS; 500nS; 1.0uS; 1.5uS
Soft-start time 1S
Feedback on voltage, current, temperature.
Overvoltage and overcurrent protection.
Serial bus connectivity to adjust output voltage, frequency and other parameters
Serial display capability for displaying voltage, frequency, temperature, current (LCD 128x32)

Pinout:

EG8010 chip modifications

Information from the official website of the manufacturer:

Download information: https://www.egmicro.com/chip-centers/6/EG8010/

Undervoltage protection: the output voltage is lower than 187V, the output turns off.

LCD display type: 1. Special LCD display (LCD3220); 2. Ordinary LCD display 128*32. (LCD needs to be purchased separately)

Chip modifications:

EG8010A: Undervoltage protection + LCD display 128*32
EG8010B: Undervoltage protection + dedicated LCD display
EG8010C: No undervoltage protection + LCD display 128*32
EG8010D: No undervoltage protection + dedicated LCD display

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр unknown