Universal two-component "cold weld" adhesive for bonding metal. Has good adhesion to the surfaces being bonded. Cures to a very strong and hard joint with no shrinkage. Corrosion-proof, waterproof. After full curing, the joint can be machined (drilled, milled, sanded) and painted. Component No.1 is covered by component No.2 (like a roll). To activate the adhesive, cut the required amount from the stick and knead it thoroughly for 1-2 minutes until uniform in consistency and color. Firmly press the compound into the crack or onto the surfaces to be bonded within 2-4 minutes. Materials must be cleaned of rust and dust. Hardening occurs in 10-30 minutes. Full cure in 24 hours. If the bonding area is damp or leaking, after applying the compound press it firmly and hold it in place until it hardens.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown