ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться

УВАГА! Шановні клієнти магазину в м.Дніпро!

З 18.12.23 магазин в м.Дніпро за адресою вул.Новокримська 58 не працює.
Однак, наш інтернет-магазин відкритий для вас 24/7.
Усі місцеві замовлення можуть бути відправлені кур'єрськими службами.




Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Power suppliesBatteriesLi-Ion, Li-Po, Li-FePO4 batteries
Код товара:
048763

Li-pol battery 403048P , 600 mAh 3.7V with protection board

Lithium polymer battery for powering radio electronic devices. Voltage 3.7V, capacity 600 mAh
With protection board.
 Li-pol battery 403048P , 600 mAh 3.7V with protection board
In stock
68,00 UAH × = 68,00 UAH
from 1 pc : 68,00 UAH
from 8 pcs : 61,20 UAH ( -10,0%)
from 40 pcs : 54,40 UAH ( -20,0%)

Current balances:

Магазин-Днепр
66 pcs
For Online Orders
66 pcs

Изображение товара

Product description format_size zoom_out zoom_in

A lithium-ion polymer battery (lithium-ion polymer battery; Li-pol, Li-polymer LiPo, LIP, Li-poly, etc.) is an improved design of a lithium-ion battery. A polymer material is used as an electrolyte.

The lithium-polymer battery is the most common power source today for mobile equipment and devices, such as: mobile phones, tablets, e-readers, smart watches, headsets, wireless headphones, MP3 players, recorders, GPS navigators, power banks, laptops, netbooks , radio-controlled models and other digital equipment.

The built-in electronic circuit (protection board) prevents overcharging, overdischarging and overheating of the battery due to too intense charging.

Main characteristics:

  • Model: 403048P
  • Battery Type: Li-Po
  • Voltage: 3.7 V
  • Nominal Capacity: 600mAh
  • Protection board: Yes
  • Rated charge current: 0.2-0.5C (C - battery capacity)
  • Maximum charge current: 1C
  • Maximum discharge current: 2C
  • Permissible charging temperature: 0..+45°C
  • Operating temperature: -20..+60°C
  • Storage temperature: -20..+35°C
  • Battery dimensions: 4×30×48 mm (thickness × width × length)
  • Weight: gr.

Features of operation of lithium polymer batteries

When producing rechargeable Li-ion and Li-Po batteries, a chemical process inhibitor is added to the electrolyte, which extends the shelf life of the batteries without compromising their technical condition. When starting to use Li-ion and Li-Po batteries (the first few charge-discharge cycles), the inhibitor decomposes.
 
If you immediately load a rechargeable battery with maximum current without prior preparation for use, the battery may be damaged (swell). This will result in reduced service life and loss of capacity. That is why, before using them, they must be discharged and charged several times. The normal operation of Li-ion and Li-Po batteries (lithium-ion and lithium-polymer batteries), in principle, cannot harm them, but the battery will reach its maximum capacity only after the inhibitor has decomposed.
 
In the future, Li-ion and Li-Po batteries must be charged until they are completely discharged, since the number of charge/discharge cycles is limited. By recharging the battery in time, you can significantly extend its service life (up to 3 times!).

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр unknown

Buy with this product: Посмотреть больше…