Low-voltage soldering iron with ceramic PTC heater.
For connection to a car battery, the power cable is fitted with clips - "alligators".
Power cable with heat-resistant, flexible silicone insulation.
The main advantage of this soldering iron is that its heating element and tip design is compatible with the soldering irons used in the most popular soldering stations. These are 900M series tips, also known as HAKKO-type tips.
The wide availability of these soldering tips is an undeniable advantage. You can always buy a tip of the required shape, and for those who own a soldering station with an existing set of tips, this soldering iron is a good complement to the station for soldering work away from the workbench.
As with soldering stations, changing the soldering tip takes just seconds.
900M tips are chrome-plated, durable, with factory-tinned ends. Chrome-plated tips need no filing and last a long time if used properly.
Ergonomic handle provides comfort during work.
As shipped from the factory, the soldering iron is fitted with a conical tip with a 0.8 mm point diameter (i.e. a 0.8mm cone).
This tip has a low heat capacity and is not suitable for all types of work; it is recommended to choose a set of replacement tips based on the intended work.
Tips can be chosen in this catalog section.
The most universal is the chisel tip, with width
tip 1.6 mm.
Specifications:
-
supply voltage: 12V
-
power: 40 W
-
power regulator: no
-
quick-change tips: yes
-
tip type: 900M
-
cable length: 1.1 m
Contents:
Attention!
Due to the fast heat-up, it is not recommended to operate the soldering iron at the maximum heater temperature, especially with a low-mass (fine) tip installed. This prevents overheating of the soldering iron, ensuring quality soldering and long tip and heater life. Since this soldering iron has no power control, in case of overheating either reduce the supply voltage or switch the soldering iron off.
The soldering tip and heating element of the soldering iron are consumables and are not covered by the warranty.
All soldering irons undergo 100% pre-sale testing.