A highly effective agent for the quick and safe removal of dirt,
grease deposits, oils, and residues of flux and solder paste.
It evaporates completely in a short time, leaving no traces, film,
or streaks. Chemically neutral towards printed circuit boards (fiberglass),
metals, glass, and most polymers.
Areas of application:
• Cleaning and degreasing surfaces of electronic and mechanical assemblies.
• Removing soldering residues and cleaning printing stencils.
• Cleaning precision instruments, optical devices, and glass surfaces.
Instructions for use:
Spray the product evenly onto the surface. For spot cleaning
hard-to-reach areas, use the extension nozzle (included).
If necessary, remove dissolved dirt with a dry, lint-free cloth.
Material precautions:
Before use on plastic surfaces (acrylic/Plexiglass,
polycarbonate, polystyrene) and lacquered parts, test the product
on an inconspicuous area. Do not use to clean touchscreens
or monitors with protective (oleophobic) coatings.
DANGER:
• Highly flammable aerosol; keep away from sources of ignition.
• Pressurized container: may burst if heated.
• Causes serious eye irritation.
• May cause drowsiness and dizziness. • Do not use on live equipment!
• Do not smoke near the product.
• Do not pierce or burn the container after use.
• Protect from temperatures exceeding 50°C.
• Use only outdoors or in a well-ventilated area.
• Keep out of reach of children.
Composition:
Chemically pure isopropanol (>99.9%) produced in the EU (CAS 67-63-0),
hydrocarbon propellant gas