Soldering iron with a PTC ceramic heater. Compared to a nichrome heater of equal rated power, this heater has better heating dynamics and a longer service life.
Conical tip with 0.8 mm end, durable, chrome-plated.
Connector with 5 "female" contacts, i.e. soldering iron without motion sensor.
Intended for use with soldering stations from various manufacturers designed for a soldering iron with a HAKKO 1321 type heater, i.e. with a thermistor as the temperature sensor.Only the connector needs to be replaced for the specific station model.
For example, this soldering iron will fit Lukey-868 and Lukey-852D+ stations, if the connector is replaced.
Resistive temperature sensor integrated into the heating element.
Rated supply voltage 24V, power 50-75 W.
Attention! the heater of this soldering iron has a connector for quick replacement. The heater does not need to be soldered. However, replacement requires the same heating element equipped with a connector (see photo).
Soldering iron cable 1 meter long.
Heater parameters: in a working element, the resistance between the heater leads is about 3-4 Ohm, and the resistance between the temperature sensor leads is about 50-60 Ohm.
All soldering irons undergo 100% pre-sale testing. The tip and heating element of the soldering iron are consumables and are not covered by the warranty.