З 18.12.23 магазин в м.Дніпро за адресою вул.Новокримська 58 не працює.
Однак, наш інтернет-магазин відкритий для вас 24/7.
Усі місцеві замовлення можуть бути відправлені кур'єрськими службами.
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Sintered heating element of low-voltage soldering irons type 907 of all manufacturers, with built-in thermocouple (soldering irons from soldering stations).
Structurally, the heater is a spiral made of thin nichrome wire wound on a ceramic rod and placed in a metal sleeve-sheath.
A shell in the form of a metal sleeve is used for greater thermal conductivity and mechanical strength.
In terms of installation dimensions, it is completely interchangeable with similar heaters in ceramics.
Features:
length to terminals: 68 mm
diameter: 3.9 mm
type of built-in temperature sensor: thermocouple
A working element has a resistance between the heater terminals of 10 ~ 11 ohms, the resistance between the thermocouple terminals is about 1.5 ~ 2 ohms. Pay attention to the polarity of the thermocouple when replacing the heater.
Lead color coding: heating element wires are one-color (usually red), thermocouple wires are different colors.
Attention ! this heater cannot be installed in soldering irons for stations designed to work with a heater of the type HAKKO-1321 . This is due to the incompatibility of the temperature sensors.
First of all in appearance. The nichrome heater has a smooth ceramic shell. The PTC-type heater has a characteristic longitudinal recess along the entire length of the rod, which is clearly visible even on the remnants of a destroyed element.
If the element is destroyed, then the presence of remnants of a nichrome coil clearly indicates the type of heater. PTC heaters do not have a coil wire inside.
You can also navigate the electrical parameters by measuring the resistance, but this must be done in advance while the soldering iron heater is in working order.
Leave your feedback or ask a question
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
Здравствуйте. У меня станция Accta301. Жало - нихром в керамике, но длина около 75мм (до выводов). Подойдет ли мне это жало и точные размеры даны в описании?
Добрый день! Данные в описании соответсвуют. Для этой станции подойдет . Несколько миллиетров различия в длине жала в данном случае не принципиальны, т.к. при установке нагревателя всё равно надо его позиционировать относительно корпуса паяльника.
паяльная станция YAXUN881D, заявлено 50Вт на паяльнике. Наверное возьму на пробу, а там что выйдет - отпишу. Будет Вам для расширения базы данных по изделиям китайпрома)))
Данные о сопротивлении нагревателя неделю назад добавлены в описание, так что можете сравнить и заказывать наверняка. Что касается базы данных по китайским изделиям - они столько всего понапридумывали, что уследить нереально. Зачастую это одно и то же под разными названиями.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown
![Soldering iron heater 907 series A1323 with thermocouple [metal, 50W, 24V]](/files/pic/galo/031320-s.jpg)
![Soldering iron heater 907 series A1323 with thermocouple [metal, 50W, 24V]](/files/pic/galo/031320-b.jpg)
![Soldering iron heater 907 series A1323 with thermocouple [metal, 50W, 24V]](/files/pic/galo/031320-1-b.jpg)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
