This constructor will allow a radio amateur to assemble a simple LED voltage level indicator. A four-LED indicator will allow you to easily control the state of the car's on-board network, or the voltage level on a 12V lead battery.
Specifications:
Input voltage: 10 - 30V
Current consumption: 25mA
Device Description
The device is assembled on a single U1 chip, which is four operational amplifiers. Each amplifier is included as a voltage comparator. When the switching voltage of the comparators is exceeded, LEDs D1-D4 are lit in series. Table 1 shows the correspondence between the glow of the LEDs and the voltage on the battery. Adjusting R5 should adjust the glow of all LEDs at a voltage of 14.4V.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown