The audio amplifier is based on the TDA7377 IC, a class AB amplifier. It allows an amplifier with a minimum of components. Recommended for beginners building a home or car audio system.
Technical specifications:
Supply voltage, V..................……….10-18
Frequency response, Hz……..20-20000
Input impedance, kOhm………………..15
THD at Usupply=14.4V, P=0.1-10W, % ....………..0.03
Gain, dB...............……...26
Rated output power, at U=14.4V and R=4Ohm, W............…………….2x20
Maximum output power, at U = 18V and R = 4Ohm, W .............………….2x30
Schematic diagram
Component layout
Module assembly and setup
Assemble the amplifier according to the instructions included with the kit. Component locations and values are given in the instructions.
ATTENTION!
The STB switch puts the IC into standby with current consumption of no more than 60 µA. To switch the chip to operating mode, connect the STB contact to VCC.
The MUT switch mutes the sound. To unmute, connect MUT to VCC. The IC should be mounted on a heat sink with a total area of at least 400 sq. cm.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown