Ultrasonic Cleaning Solution TERMOSONIK PCB - is a harmless, non-flammable water-based product.
Designed for fast removal of any fluxes, solder pastes and SMT adhesives, as well as other contaminants left after soldering, from stencils or PCBs.
The product is ready to use – DO NOT DILUTE.
Mix thoroughly before use.
Directions: Pour the liquid directly into the ultrasonic cleaner. Clean ultrasonically for 10 minutes. Then remove the board and rinse it thoroughly under running water!
It is recommended to rinse the board first with tap water, then with demineralized or deionized water to remove any residues. Leave to dry at room temperature or dry with a stream of hot air.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown