Electrically insulating, thermally conductive silicone pad with added aluminum nitride. For mounting heat sinks on heat-generating electronic components. Thickness 0.5 mm, sheet 100 x 100 mm.
Used to provide good heat transfer between a heat-generating component (processor, microassembly, LED) and a heat sink.
It also has dielectric properties, electrically insulating the heat sink from the component.
The silicone base gives the material high elasticity; the pad fills the micro-roughness of the mating surfaces well.
The filler is aluminum nitride, which has excellent thermal conductivity.
thickness: 0.5 mm
sheet size: 100 x 100 mm
thermal conductivity: 4.6 W/mK
dielectric constant: 6.5 kV/mm
operating temperature range: -50°C +200°C
linear elongation coefficient: 1.68
Specifications:
JRF-PM460 Product Performance Parameter Table
Test Item (Unit)
Value
Test Standard
Model
PM460
--
Thickness (mm)
0.25—5.0
ASTM D 347
Color
Black
Visual
Thickness Tolerance (mm)
0.05±0.01
ASTM D 347
Continuous Use Temperature (℃)
-50~200
TGA+DMA
Thermal Conductivity (W/m-k)
4.6
ASTM D 5470
Volume Resistivity (Ω-cm)
1017 ↑
ASTM D 257
Breakdown Voltage
6.5KV ↑
ASTM D 149
Hardness (shore A)
50±5
ASTM D 2240
Specific Gravity
3.3
ASTM D 792
Tensile Strength (kg/cm²)
70
ASTM D 412
Elongation (%)
68
ASTM D 412
Environmental Protection (6)
Check out
IEC 62321
Halogen (4)
Check out
EN 14582
Flame Retardant Rating
V----0
U.L 94
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown