Micro drill ZG-250 [engraving machine]

Изображение товара

Product description format_size zoom_out zoom_in

This versatile miniature electric drill is analogous to the well-known DREMEL products. Due to the wide popularity of the instrument, the name has already become a household name, and all such instruments are referred to simply as "dremel".
The straight multi-grinding machine is applicable for drilling, grinding, rust removal, polishing, cutting, engraving, etc. Allows to process steel, wood, glass, ceramics, plastics and other materials.
Smooth adjustment of engine speed allows you to use various types of nozzles (included - 40 pieces, see the list below), and the ability to install a flexible shaft (supplied in the kit) to carry out both engraving and drilling or milling in hard-to-reach places. The spindle has a mechanical lock for easy changing of the working tool.
Two interchangeable collets for inserting accessories with a shaft diameter of 2.4 mm or 3.2 mm make it possible to widely diversify the assortment of accessories.
A telescopic tripod for hanging a drill will provide good ergonomics and take up a minimum of working space, and the design of the clamp-base of the tripod allows you to fix it both on the edge of a horizontal tabletop with a thickness of up to 60 mm and on the end of a vertical plane.

For easy transportation and storage, the micro drill and accessories are packed in a plastic case.


ATTENTION!
The flexible shaft must be lubricated before use. To do this, remove the wire core from the braid and cover it with a grease (any, for example Litol-24 or CIATIM).
During operation, the shaft must also be periodically lubricated.
A good result (reduction of frictional power losses, increase in the resource of the flexible shaft) is obtained by a grease with molybdenum disulfite, for example SLGM100.


Main characteristics:

Power -250 W
Power supply - 230 V, 50 Hz
No load rotation speed - 8000 - 30,000 rpm
Packing size - 300 x 210 x 90 mm
Collet diameter - 2.4 - 3.2 mm

Equipment:
Instructions in Russian
Plastic case for transportation and storage
Flexible shaft
Clamp (tripod base)
Telescopic tripod
Cut-off wheel 24 x 0.8 mm (8 pcs)
Felt polishing attachment 24 x 5 mm
Felt polishing attachment 13 x 8 mm
Grinding stone on a shaft, of various shapes - 12 pcs
Sanding cylinder 12.5 x 13 x 1.5 mm (5 pcs)
Drill for wood with a diameter of 3.5 mm
Abrasive straightening block 10 х 10 х 26 mm
Mount for circular nozzles
Mount for sanding cylinders
Felt attachment
9.5mm Chuck Wrench
Replaceable collet 2.4 mm