Можливі тимчасові затримки відвантаження товарів транспортними компаніями. Термін відправки після отримання оплати до 4 робочих днів. Вибачте за незручності.
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Digital temperature measuring sensor based on the original microcircuitDS18B20by Dallas Semiconductor (Maxim Integrated), which is controlled by the 1-Wire protocol.
The sensor is assembled in a metalcase-sleevediameter 6mm and length 50mm. From the inside, the sensor is filled with heat-conducting acid-freesealant... Each soldered contact of the sensor and cable is covered with heat shrink tubing. HimselfPVC cablehas a length of 1m, a diameter of 3.4mm and has 3 signal wires.
Pinout: red - power supply (VCC), black - common (GND), yellow - data (DATA).
Main characteristics:
Sensor type: digital
Sensor IC: DS18B20
Sleeve diameter: 6mm. In the area of the heat shrink tube, diameter ~ 6.5mm
Sleeve length: 50mm. Length of section without heat shrink tube ~ 30-35mm
Cable length: 1m
Cable type: 3-core PVC 26AWG (7/0.16), black
Cable diameter: 3.4mm
Individual production of sensors for different cable lengths is possible. For all suggestions, write to the mail
¦ ¦
deni.voron@gmail.com
Добрий день. Датчик DS18S20, по схемі включення, повинен ати резистор між ніжкою даних і живленням. В даному випадку, резистор вже є в корпусі, чи його потрібно підключати окремо? Дякую.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown