ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться
Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Electronic repair partsLED backlight lamps for LCD monitors (laptops)
Код товара:
023450

Lamp LED for 19 "(425mm) monitor

LED backlight 425mm long. Cold light.
Attention! Check the pinout (according to the inscriptions on the board, not the color of the wires) before installing into the monitor!
Lamp  LED for 19
NOT available.
Expected price: 420,00 UAH
from 1 pc : 420,00 UAH
from 6 pcs : 399,00 UAH ( -5,0%)
from 12 pcs : 378,00 UAH ( -10,0%)
Prices are indicated at the time of product availability and may change upon receipt

Current balances:

NOT available

Изображение товара

Product description format_size zoom_out zoom_in

This kit is recommended for use when repairing or replacing CCFL lamps with LED strips in monitors, TVs, laptops.
Each plate contains 72 LEDs. The LEDs are connected in clusters of 3 LEDs, which allows them to be cut to the desired length.

Lamp parameters:
Width:
4mm .
Height (with LEDs):
2.65mm.
LED pitch: 5.5mm.
Color temperature: 5000-7000K.
Package Contents:
  • LED lamp - 2 pcs;
  • Driver - 1 pc;
  • Driver cable - 1 pc.
No self-adhesive materials applied.

Driver dimensions: 70 x 20 x 10 (mm).
Supply voltage: 10-30 V.
PWM - brightness control.

The kit uses the DF6113 driver according to the ENA+DIMM inverted analog dimming circuit. To connect to a constant full brightness, the ENA (turn on) pin must have a high logic level (+ 5V), and the DIMM (dimming) must have a low logic level (connect to a minus or simply leave it unused).
For dimming (dimming), it is necessary to apply a high logic level to the ENA contact, and to apply a PWM signal or an analog signal to the DIMM, given that the dimming connection circuit is inverse (0-on, 5V-off).
For more details, see the datasheet for the microcircuit.


Typical driver circuit:




Dimmer not supplied.
Check the correct connection of the connectors !!! The store is not responsible for the correct connection of the power poles from the driver to the monitor ! And the design is such that they can be confused in color if you insert the connector on the other side. On the back of the driver board, the lettering of the pin assignment is painted with paint. Check 7 times before cutting the wire!

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр unknown

Buy with this product: Посмотреть больше…