ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться
Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Development toolsModulesSensor modules
Код товара:
024412

Module Air pressure and temperature sensor BMP180

Micromodule for measuring atmospheric pressure and temperature
Module  Air pressure and temperature sensor BMP180
NOT available.
Expected price: 56,70 UAH
from 1 pc : 56,70 UAH
from 5 pcs : 53,86 UAH ( -5,0%)
from 20 pcs : 48,19 UAH ( -15,0%)
Prices are indicated at the time of product availability and may change upon receipt

Current balances:

NOT available

Изображение товара

Product description format_size zoom_out zoom_in

The module is an atmospheric pressure sensor and a thermometer. It is built on the Bosch BMP180 microchip, which replaced the BMP085 chip. Altitude is determined by converting pressure and temperature data - the digital barometric pressure and temperature module is used as an altimeter.
Each BMP180 is factory calibrated. As a result, the calibration coefficients are written to ROM. Has an I2C interface. The measured values ​​of pressure and temperature are transmitted via the serial data bus of the digital barometer-thermometer. Altitude is calculated according to the method described in the documentation of the BMP180 microcircuit. The number of measurements per second can reach 128. Usually the sensor is used in the mode of one measurement per second. This increases accuracy and saves current consumption. The sensor can measure atmospheric pressure with varying accuracy. The required measurement accuracy is communicated to the sensor by a microcontroller. It is important to set the delay correctly in the program before reading the data registers. BMP180 corresponds to the BMP085 chip in terms of data processing software. It can be used in devices based on Arduino, AVR, PIC, ARM, etc.

Key Features:

  • Model: BMP180
  • Supply voltage: 5V, 1.8-3.6V
  • Consumption current:
  • - in standby mode 0.1 μA
    - 0.5 μA at a measurement frequency of 1 Hz
  • Pressure measurement range: from 300 to 1100 hPa (which corresponds to an altitude of -500 ... 9000 m)
  • Pressure measurement accuracy: ±0.02 hPa (±0.17 m in height)
  • Temperature measuring range: 0 ... 65°C
  • Temperature measurement accuracy: ±2°C
  • Resolution: 16 bit
  • Interface: I2C
  • Maximum interface speed: 3.4 Mbaud
  • Address: 7 bits on the I2C bus with a value of 0x77
  • Response time: 7.5ms
  • Operating temperature range: –40 ... 85°C
  • Screw hole: 3mm
  • Dimensions 15 x 14 x 3 mm

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

  • Micro51 02:59 22.05.2020 share

    Здравствуйте! А чем отличается от этой позиции: 038098 ? Спасибо!

    Is the review helpful?
    • Денис (Менеджер интернет-магазина) 15:20 25.05.2020 share

      Ответил Вам на почту. В кратце: разница в геометрических размерах, и то что у 024412 есть на борту стабилизатор на 3.3В с возможностью подключать доп. маломощные устройства до 100мА с пина 3.3V.

      Is the review helpful?
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр unknown

Buy with this product: Посмотреть больше…