Resistive NTC temperature sensor 10K type B3470 1%. Suitable for "folk"
thermostat W1209, as well as many other devices, since it is the most common type of thermistor.
The sensor is assembled in a metal
case-sleevewith a diameter of 5mm and a length of 40mm. From the inside, the sensor is filled with heat-conducting acid-free
sealant... Each soldered contact of the sensor and cable is covered with heat shrink tubing. Himself
PVC cablehas a length of 1m and a diameter of 3mm and has 2 signal wires and a shield.
Pinout: red and white - sensor leads, braid - not used.
The sensor goes already in the seated thermotube. Hot glue on the walls of the thermotube seals the joint from the inside, and also creates an elastic place that increases the bending radius of the cable.
Main characteristics:
-
Sensor type: resistive
-
Sensor resistance: 10K, 1%
-
Sensor type: B3470
-
Sleeve diameter: 5mm. In the area of the heat shrink tube, diameter ~ 5.5mm
-
Sleeve length: 40mm
-
Cable length: 2m
-
Cable type: 2-core PVC with screen
-
Cable diameter: 3mm
Individual production of sensors for different cable lengths is possible. For all suggestions, write to the mail
¦ ¦
deni.voron@gmail.com
.jpg)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
