Body protection agent "Mastic Bitumen" with anti-corrosion properties INTERTOOL FS-6850 is a black aerosol agent based on modified bitumen. When sprayed onto the surface, it forms an impact-resistant layer that is resistant to both mechanical damage and the corrosive effects of water, salts, weak acids, alkalis, and all kinds of road reagents. Provides long-term protection and sound insulation. Stops corrosion, preventing its further spread.
Bituminous mastic with anti-corrosion protection is resistant to temperature extremes and is able to protect the coating at temperatures from -40°C to+90°C. It has excellent adhesion to most surfaces. Resistant to aging, drying out, exposure to sunlight.
Purpose:
• For anti-corrosion protection of elements of the bottom, sills, wheel arches, internal and external parts of cars, motorcycles, bicycles, ATVs, buses, agricultural machinery.
• To protect metal parts of equipment.
• To repair roofs and seal cracks in the walls and ceilings of buildings.
• For waterproofing metal and wooden structures.
One cylinder is designed to process 2.5-3 m2.
Method of application:
The optimum temperature of the cylinder and the environment should be in the range from+15°С to+25°С. Prepare the surface for applying the mastic: clean from dirt and rust, degrease. Painted and glossy surfaces must be sanded with sandpaper. Stir the contents of the can by shaking it for at least 3-5 minutes - this will ensure a uniform coating layer and prevent the sprayer from clogging. In the process of work, it is necessary to shake the balloon periodically.
Spray the mastic with a thin layer from a distance of 25-30 cm. The best result is achieved when 2-3 thin layers of mastic are applied to the surface with an interval of 20 minutes.
Important: if the mastic in the cylinder has not been completely consumed, the valve must be cleaned for its further use. Turn the can upside down with the spray gun and spray until the spray is discolored. Otherwise, the mastic in the valve will dry out, and it will be impossible to use it in the future.
Drying time 15-25 minutes at a temperature of+25°С. The coating is usable in 24 hours after treatment.
If the mastic gets on unwanted areas, it is recommended to wash it off using INTERTOOL FS-6940 bitumen stain cleaner
Precautions:
Avoid direct sunlight and heating over+50°С. Do not spray near open flames and hot surfaces. No smoking when using. Apply in well ventilated areas. Avoid contact with the respiratory system, eyes, mouth, as well as on damaged skin. Do not open or burn the can after use. Store at temperatures from+5°C to+35°C out of reach of children.
Cylinder under pressure! Flammable!
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
