AG TermoPasty art.AGT-111 Electroless copper tinning agent 45 g
Preparation concentrate (powder) for creating a protective electrically conductive coating on traces and pads in PCB manufacturing.
Forms dense, glossy coatings with very good adhesion and a thickness of 5 – 12 µm. Protects against the harmful effects of air and moisture.
Dissolve the package contents in 0.5 l of water at 80-90°C. (distilled or demineralized water is recommended).
Stir until completely dissolved and let cool to room temperature.
Thoroughly clean the printed circuit board.
Immersion tinning in a solution at 20-30°C for 5 minutes to several hours depending on the desired film thickness (maximum thickness 12 µm).
Thoroughly rinse the printed circuit board (first in cold, then in hot water) and dry it.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown