Dielectric lacquer PVB 60 5 l.
Manufacturer:AG TermoPasty, Poland.
Universal varnish for protecting printed circuit boards, transformer windings and electric motors.
Quick-drying clear PVB coating with good insulating properties. Protects PCBs and other components operating in adverse atmospheric conditions from corrosion. The coating protects PCBs against leakage currents and short circuits.
Highly fluid, penetrates porous structures well, fills microcracks.
-
forms a protective and insulating layer that protects against atmospheric influences such as: moisture, oxidation, dust, chemical contamination
-
adheres well to metal, plastic and wooden surfaces
-
forms a layer resistant to dilute acids, alkalis and atmospheric factors
-
can be soldered through the lacquer layer
-
prevents sparking and corona discharge
-
limits breakdowns between traces
-
does not change transparency or elasticity even long after application
-
operating temperature range: from -40°C to+60°C
-
operating temperature: -50°C + 150°C
-
ignition temperature: 380°C
Application:
Insulates and protects electronics in the broad sense, cables and wires, high-voltage transformers, and electric motor windings.
In the automotive industry, to prevent short circuits.
In power engineering and electromechanics, for creating a protective layer.
Varnish application recommendations:
Before application, the surface must be cleaned of dirt, grease, etc. Apply by brush, dipping or spray gun. When spraying, apply from a distance of approximately 30 cm, otherwise runs may form on the surface.
To ensure even coverage, the varnish must be applied in 2-3 coats with intermediate drying for 20-30 minutes.
Additional information:
Polyvinyl butyral (or PVB ) is a resin mainly used for applications that require strong binding, optical clarity, adhesion to many surfaces, toughness and flexibility. It is produced from polyvinyl alcohol by reaction with butyraldehyde . Its main application is laminated safety glass for automobile windshields . Trade names of PVB films include KB PVB, Saflex, GlasNovations, Butacite, WINLITE, S-Lec, Trosifol and EVERLAM. PVB is also available as 3D printer filament, which is stronger and more heat-resistant than polylactic acid (PLA).
PVB resins (supplied by the manufacturer in powder or granular form) are also used in a number of applications, including technical ceramic (temporary) binders, inks, transfer ribbon. inks, paints and coatings (including wash primers), binders for retroreflective sheeting and binders for magnetic media.
PVB resin is especially useful for bonding to metals, ceramics and other inorganic substances.
Based on WIKIPEDIA