The CXG E110WT soldering iron is based on the popular model
CXG 936d.
Extended supply voltage range. The soldering iron works stably and holds the set temperature at supply voltages from 85V to 240V AC.
The dimensions, ergonomics and design of the previous model are kept, with some new features added: LED backlit display and an ON/OFF button.
The bright LED display makes it comfortable to work even in poor light. The on/off switch on the handle is convenient - no need to unplug the cord every time.
This model also has power increased to 110W.
-
multi-voltage power supply
-
temperature shown on LED display
-
button control (two buttons on the soldering iron handle)
-
stores the preset temperature
-
tip temperature correction (when measured with an external thermometer)
-
PID control algorithm, precise temperature holding
-
PTC ceramic heater with integrated resistive temperature sensor
-
tips of the series 900M (as with most popular soldering stations)
-
ESD compliant
Add to that a fairly flexible power cord with a three-pin Euro plug (cord length 1.4 m) and an ergonomic handle with a silicone grip pad.
Of course, the handle diameter is slightly larger than a standard 907 soldering iron, at 19.5 mm.
The plastic of the handle and front nut is non-flammable.
Heater power switched by a MOSFET.
For multi-voltage operation, the soldering iron uses a PTC ceramic heater rated at 110V supply voltage, with an integrated resistive temperature sensor.
Heater check values: in a working element, the resistance between the heater leads is about 50-55 Ohm, and the resistance between the resistive temperature sensor leads is also about 50-60 Ohm. The heater leads are marked with red insulation, the sensor leads are blue.
Total soldering iron length 220 mm.
The soldering iron does not fully replace a bench soldering station, but in many cases it is a worthy alternative, and given its compatibility in
tip size it is useful as an extra tool for field work.
Specifications:
-
supply voltage: 85-240V, 50Hz
-
power (max): 110W
-
temperature range: 80°C - 500°C
-
display: LED
-
password setting: no
-
heater type: PTC ceramic
-
tip type: 900M
-
heater diameter: 3.8 mm
-
soldering iron length: 220 mm
-
power cord length: 1.4 m
-
ground connection: yes
Contents:
-
soldering iron assembly: 1 pc
-
instructions in English - 1 pc
The soldering iron warranty is 3 months.
The warranty does not cover heating elements and soldering tips, which are consumables.