Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Soldering iron with thermostat CXG936d-CV [220V, 60W, without slip-timer]
Microprocessor controlled, LED display. 220V, 60W. Tip 900M, PTC heater. Soldering station functionality in a soldering iron handle! Version without sleep timer.
This modification of the soldering iron differs from the base model CXG936dthe absence of a slip-timer mode (i.e., switching to standby mode after prolonged inactivity).
There are only two differences from a conventional stationary soldering station: power supply of the soldering iron heater with mains voltage and compactness. After all, the usual control unit is absent, the board with the display is located right in the handle of the soldering iron.
The rest of the characteristics are quite consistent with the "station" -
temperature indication on LED-display
push-button control (two buttons on the handle of the soldering iron)
memorizing the preset temperature value
tip temperature correction (when measured with an external thermometer)
PID control algorithm, precise temperature control
PTC ceramic heater with integrated RTD
sting series900M(like most popular soldering stations)
ESD compliance
Let's add here a rather elastic power cord with a three-pole Euro plug (the length of the cord is 1.4 m - not a stub at all ;-), as well as a very ergonomic handle with a silicone patch in the coverage area.
Of course, the diameter of the handle is slightly larger than the standard 907 soldering iron, and is 19.5 mm. Well, after all, the control board must somehow be placed inside the handle ...
The plastic used for the handle and front nut is non-flammable.
Switching the heater power supply with a triac, through an optothyristor.
The total length of the soldering iron is 220 mm.
The soldering iron does not completely replace a stationary soldering station, but in many cases it is a quite worthy alternative, and given the compatibility oftip sizeit is relevant as an additional tool for field work.
In the basic configuration, a thin needle-shaped tip with a needle curvature radius of 0.4 mm is installed.
Characteristics:
supply voltage: 220V, 50Hz
power (max): 60W
temperature adjustment range: 80°C - 450°C
display backlight: no
password setting: no
heater type: PTC ceramic
tip type (sting): 900M
heater diameter: 3.8mm
soldering iron length: 220 mm
power cord length: 1.4 m
presence of grounding: yes
Completeness:
soldering iron assembly: 1 piece
instruction in English - 1 piece
All soldering irons are tested before being put on the market.
The warranty for the soldering iron is 3 months.
The warranty does not cover heating elements and soldering tips, which are consumables.
, это указано в тексте описания (кликабельно), а также во вкладке "К этому товару".
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown
![Soldering iron with thermostat CXG936d-CV [220V, 60W, without slip-timer]](/files/pic/proskit/power/031052-1-s.jpg)
![Soldering iron with thermostat CXG936d-CV [220V, 60W, without slip-timer]](/files/pic/proskit/power/031052-1-b.jpg)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
