There are only two differences from a conventional stationary soldering station: power supply of the soldering iron heater with mains voltage and compactness. After all, the usual control unit is absent, the board with the display is located right in the handle of the soldering iron.
The rest of the characteristics are quite consistent with the "station" -
-
temperature indication on LED display
-
push-button control (two buttons on the handle of the soldering iron)
-
memorizing the preset temperature value
-
tip temperature correction (when measured with an external thermometer)
-
PID control algorithm, precise temperature control
-
slip-timer mode
-
PTC ceramic heater with integrated RTD
-
tip series 900M (like most popular soldering stations)
-
ESD Compliance
Let's add here a rather elastic power cord with a three-pole Euro plug (the length of the cord is 1.4 m - not a stub at all ;-), as well as a very ergonomic handle with a silicone patch in the coverage area.
Of course, the diameter of the handle is slightly larger than the standard 907 soldering iron, and is 19.5 mm. Well, after all, the control board must somehow be placed inside the handle ...
The plastic used for the handle and front nut is non-flammable.
Switching the heater power supply with a triac, through an optothyristor.
The total length of the soldering iron is 220 mm.
A soldering iron does not completely replace a stationary soldering station, but in many cases it is a quite worthy alternative, and given the compatibility according to
tip size it is relevant as additional tool for fieldwork.
In the basic configuration, a thin needle-shaped tip with a needle curvature radius of 0.4 mm is installed.
Specifications:
-
supply voltage: 220V, 50Hz
-
power (max): 60W
-
temperature adjustment range: 80°C - 450°C
-
display backlight: no
-
password setting: no
-
heater type: PTC ceramic
-
tip type (tip): 900M
-
heater diameter: 3.8 mm
-
soldering iron length: 220 mm
-
power cord length: 1.4 m
-
presence of grounding: yes
Completeness :
-
soldering iron assembly: 1 pc
-
instruction in English - 1 pc.
The soldering iron has a 3 month warranty.
The warranty does not cover heating elements and soldering tips, which are consumables.
![Soldering iron CXG936d [220V, 60W] with temperature controller](/files/pic/proskit/power/031052-1-s.jpg)
![Soldering iron CXG936d [220V, 60W] with temperature controller](/files/pic/proskit/power/031052-1-b.jpg)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
