A155 two-component crystal clear epoxy adhesive becomes solid after curing. To prepare the adhesive, mix 3 parts resin (component A) with one part hardener (component B) by weight. Stir thoroughly and let stand for 5 minutes for the air bubbles to disappear. The resulting mixture can be used for casting into molds or for bonding materials. Curing time may vary from 12 to 36 hours depending on the amount of adhesive and the temperature. For faster curing, the adhesive can be heated to 60 degrees. The curing time is then reduced to 2 hours.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown