ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Cart is empty!
CUSTOMER LOGIN
Search:

Enter a search string or click on the microphone icon and begin speaking.

×
Query history
your search history is empty
Whole catalog ↠ Measuring instruments ↠ Multimeters, current clamps and accessories for them ↠ Digital multimeters
Product code:
051423

LED tester LED tester WYT-900C

Tester of LEDs and LED strips up to 300V
LED tester LED tester WYT-900C
Manufacturer: SUSWE
In stock
939,80 UAH × = 939,80 UAH
from 1 pc : — 939,80 UAH
from 2 pcs : — 892,90 UAH ( -5,0%)
from 5 pcs : — 798,90 UAH ( -15,0%)

Current balances: 14 pcs


Product picture

Product description format_size zoom_out zoom_in

  WYT-900C — designed for testing and troubleshooting both individual LEDs and LED assemblies with a supply voltage from 0 to 300 V. The device allows smooth adjustment of the supply current to prevent damage to LEDs. It is especially useful for repairing monitor and TV backlighting, as it enables testing LED backlight strips without disassembling the panel. Package includes: tester + high-quality probes with sharp needles. 

Main specifications:

  • Model: WYT-900C
  • Power supply voltage: 85-265 V
  • Output voltage (high-voltage range): 0-300 V DC
  • Output voltage (low-voltage range): 0-19V DC
  • Output current: 20-60 mA
  • Soft-start function
  • Automatic range switching
  • Intelligent working current detection

 This device allows checking the integrity of both a single LED and a series chain of up to 100 connected LED chips. The intelligent algorithm and galvanic isolation prevent both damage to the chip when connecting a single element at 300 volts and electric shock. The built-in voltmeter displays the operating voltage of the LED or the chain of series-connected chips. A value of 0 volts indicates a short circuit, while 300 volts indicates an open circuit. When an LED is detected, the built-in microcontroller smoothly increases the current to a safe level and displays the operating voltage on the screen. In practice, the tester slightly underestimates the nominal current through the LED, so the voltage reading is 0.1–0.2 volts lower than the actual value. This does not affect the understanding of the operating voltage, but indicates careful testing of the component.
 WARNING: Polarity must be observed during testing! If the LED does not have a protective Zener diode, applying even a short high voltage may damage it.

Only registered users can leave feedback and ask questions

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр unknown

Buy with this product: View more…

Последние просмотренные товары Посмотреть Последние...