Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Spare soldering iron YIHUA-907A Thermocouple Heater
For those modifications of YIHUA soldering stations that are designed to work with a heater with a built-in thermocouple. Supply voltage 24V, power 50W.
Soldering iron with ceramic heater with built-in thermocouple, supply voltage 24V, power 50W.
5-pin connector, i.e. soldering iron without motion sensor.
Sting - cone with an end face of 0.4 mm, durable, chrome-plated.
The design of the heater is a ceramic rod wound with a thin nichrome wire, enclosed in a shell - a ceramic tube. There is also a thermocouple under the shell. The ceramic sheath protects the nichrome heater from rapid burnout, improves heat transfer, and also insulates the tip from supply voltage breakdown.
It is also possible to use with similar soldering stations from other manufacturers, designed to work with a soldering iron, the heater of which has a built-in thermocouple as a temperature sensor. You only need to replace the connector.
For example, this soldering iron is suitable for Lukey-702 and Lukey-852D+FAN stations, if you changeconnectoror connect viaadapter.
Parametersheater: for a working element, the resistance between the heater terminals is 16-17 Ohm, the resistance between the thermocouple terminals is about 0.5 Ohm.
To connect the soldering iron to non-original control units (homemade or from other manufacturers), you can use the following mating connector parts: for installation on the device body
Добрый день! Не знаю, мне неизвестен тип термодатчика в нагревателе паяльника Вашей станции.
Если термопара - подойдет Если резистивный датчик - нет.
Вот, цитирую описание: "Возможно также использование с аналогичными паяльными станциями других производителей, рассчитанных на работу c паяльником, нагреватель которого имеет в качестве термодатчика встроенную термопару. "
Добрый день! У нас нет в продаже блоков управления без паяльников. Если Вас интересует бюджетная станция именно с таким паяльником, то обратите внимание на
YIHUA-936
"Для подключения паяльника к неоригинальным блокам управления (самодельным или других производителей) можно использовать вот такие ответные части разъема: для установки на корпус прибора
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
slav.voron@gmail.com
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
