У зв'язку зі святкуванням Нового Року ми працюємо за наступним графіком: • з 31.12.24(Вт) по 02.01.25(Чт) не працюємо • з 03.01.25(Пт) працюємо в звичайному режимі.
Інтерет-магазин приймає замовлення цілодобово 24/7 !
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
PWM power controller - a set designed to regulate the average power in the load using pulse width modulation. It can be used to control the speed of rotation of DC collector motors, the power of heating elements, incandescent lamps and LED strips 12-24V.
Specifications:
Supply voltage: 12 - 30 V
Current consumption: <10mA
Maximum load current: 10A
Max imp. load current: 25 A
PWM Duty Cycle: 5-95%
PWM frequency: ≈20kHz
Schematic diagram
Job Description
The regulator consists of a variable master oscillator on the NE555 chip and a switching transistor Q1. The duty cycle of the pulses is changed by a variable resistor RV1 in the range of 0.05-0.95. Power is supplied through a stabilizer, which expands the allowable supply voltage range to 12-30V. The circuit has reverse polarity protection for the control circuit.
When using a load with a current consumption of about 10A, it is advisable to place Q1 on a heatsink. When using an inductive load at currents from 5A, it is necessary to shunt the output with a back-connected Schottky diode, installing it on a radiator. The maximum allowable current of the shunt diode should exceed the maximum load current by 30-100% with a margin.
Check your connections!
Notes:
1. When using, it should be borne in mind that the device regulates the average current in the load, and the pulse current remains unchanged and maximum.
2. Set the variable resistor last.
3. When switching on for the first time, check the connection for the absence of short circuits and set the regulator to the MIN position.
Element layout
Leave your feedback or ask a question
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown
K-124_M1
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
