Professional soldering station with hairdryer and soldering iron.
Temperature control according to the PID-regulator algorithm, implemented on a specialized SAMSUNG microcontroller.
Switching of heating elements - triacs, with zero crossing control.
Metal case of the control unit, mechanical power switch (key) on the rear panel.
Hair dryer nozzle for crimp type nozzles.
Large seven-segment indicators for temperature and airflow level are clearly visible from any viewing angle.
-
LED display with digital indication of the temperature of the hot air gun and soldering iron, digital indication of the air flow level.
-
The electronic temperature control of the hair dryer ensures good thermal stability even with a sharp change in the volume of supplied air.
-
650 W hot air gun with built-in fan, maximum air supply capacity - 120 liters per minute, temperature from 100°C to 48°C. The set includes 4 crimp-type cylindrical nozzles of various diameters.
-
the function of automatic cooling of the hot air gun after installing the hair dryer in the holder protects the heating element from overheating (the power to the heater is turned off, while the fan continues to blow through the hair dryer, cooling it down to a temperature of 100°C.
-
soldering iron 24 V, power 60-75 W; temperature range from 200°C to 480°C.
-
antistatic design, galvanic isolation, 24 V supply voltage ensure the safety of electronic components and the board.
-
The applied PTC-ceramic heating element HAKKO 1321 ensures reliable operation, durability and temperature stability.
-
resistive-type soldering iron thermosensor (built into the heater), which provides good heating dynamics and greater accuracy of temperature maintenance compared to a thermocouple, especially when working with multilayer printed circuit boards.
-
a motion sensor built into the handle of the soldering iron (miniature ball switch) is used to first put the soldering iron into standby mode when there is no activity.
-
the air flow of the hair dryer is adjusted by turning the knob of the potentiometer, the temperature - by buttons, two pairs of buttons for the soldering iron and the hair dryer.
-
in the basic configuration, the sting is a cone with an end face of 0.8 mm, durable, chrome-plated; The design compatibility of the soldering tips with the HAKKO and XYTRONIC soldering systems provides a large selection of tips (these tips are used in the LUKEY station and similar clones).
-
The supplied stand with a cellulose sponge for wet cleaning of the tip reliably protects the soldering iron from mechanical damage when dropped, as well as from accidental touching of heated parts.
Separate switches for the soldering iron channel and the hair dryer channel separately (keys located at the top of the sides of the front panel).
The standby function (slip timer) for the soldering iron with adjustable standby time not only saves energy, but also increases the service life of soldering tips and heating elements. If necessary, you can turn off the slip-timer by moving the soldering iron from the "auto" mode.
Anti-jamming Turbo Hair Dryer: if the fan rotor stops, the power to the hair dryer heater is cut off and the display shows the corresponding error code.
In automatic mode, when the hair dryer is inserted into the holder, the heating element is also turned off and air blowing continues, reducing the temperature to 100°C.
Another “smart” function is fire protection. If the power is lost during the operation of the hair dryer, then when the power is restored, the hair dryer will turn on only after it is installed in the holder. For example, if left on the table during a power outage, it will not damage anything with a stream of hot air, it will not create a fire source when the power supply is restored.
In terms of functionality of a soldering iron and a hair dryer, this station is close to the popular LUKEY-868 model, surpassing it in terms of comfort and performance level.
Dimensions:
-
width 185 mm (without hair dryer holder)
-
height 130 mm
-
depth 160 mm (excluding protruding handles, soldering iron connector)
Completeness:
-
main unit+hair dryer+power cable
-
instruction manual in English
-
soldering iron
-
soldering iron stand
-
nozzles for hot air gun - 4 pcs
All models of YIHUA soldering stations and board heaters are guaranteed for 3 months.
The warranty does not cover heating elements and soldering tips, which are consumables.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
