У зв'язку зі святкуванням Нового Року ми працюємо за наступним графіком: • з 31.12.24(Вт) по 02.01.25(Чт) не працюємо • з 03.01.25(Пт) працюємо в звичайному режимі.
Інтерет-магазин приймає замовлення цілодобово 24/7 !
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Platform for heating printed circuit boards from below when dismantling (mounting) electronic components. Unlike hot air heaters, in which heat is transferred through the contact of the board with a coolant (hot air), this design uses direct heating - i.e. transfer of thermal energy from a heating element by a stream of infrared radiation of a long-wavelength sub-band. Advantages of IR heating for PCBs: - lack of influence of air flow turbulence (as a result - uniform heating); - a much larger area of the heated area; - the possibility of limiting heating of individual sections of the board by shielding with reflective foil; - no noise and vibration from the blower.
Adjustable skids are provided for mounting the boards. The maximum width of the board installed in the holder is 155mm. The size of the heating zone is 110mm * 110mm. Axial bearings are pressed into the slide, which ensures smooth movement along the guides, without jamming. Larger boards can be stacked simply over the rails.
The heating element is ceramic, one-piece. Temperature controller with digital display and push-button control.
Supply voltage - 220V, 50Hz Maximum power - 600W Temperature adjustment range of the platform heating element - 10°С to 350°С Dimensions -220x70x250 mm
Together with a hot air soldering station, the infrared preheater is quite affordable and quality equipment for repairing mobile phones, PDAs, digital cameras, computer boards, etc., and can also be successfully used for prototyping, in the development and manufacture of small batches of products.
Warranty obligations for all models of soldering stations and board heaters YIHUA, Lukey, ProsKit, Aoyue, Sunnko, Baku are 3 months. The warranty does not cover heating elements and soldering tips, which are consumables.
Leave your feedback or ask a question
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
