Kafuter K-705 RTV Silicone Sealant Adhesive 45g TRANSPARENT
One-component RTV silicone compound.
Transparent viscous liquid.
Chemically neutral, does not contain acids, therefore, does not cause corrosion of the surfaces to be glued.
Good adhesion to metals, glass, plastic, wood.
Provides dielectric insulation, prevents aggressive environmental influences.
Retains its mechanical and dielectric properties over a wide temperature range, from -60°C to +200°C.
Not hot. Waterproof.
Excellent aging resistance, high moisture resistance. Resistant to electric arc.
Applications: perfusion sealing of electronic components, bonding and sealing of LED products.
Retains elasticity, high adhesion and water resistance at low and high temperatures. Accordingly, it is recommended for use in various climatic equipment (air conditioners, refrigerators, freezers, ventilation systems, water heaters).
Packing: tube 45 grams.
Specifications:
-
color: transparent
-
drying time: (25°) ≤ 25 min
-
dielectric constant,kv/mm: ≥16
-
hardness (Shore A): 30-40;
-
tensile strength: ≥0.3MPa
-
shear strength: ≥0.3MPa
Usage Guidelines
Curing of one-component silicone compounds occurs due to interaction with moisture contained in the air. Cures well at room temperature within a relative humidity range of 30% to 80%. The level of about 90% of the values of their physical properties is reached in 24 to 72 hours. It is possible to accelerate the curing of the composition with a slight heating, not higher than 60°C.
Silicone sealants should be stored in airtight containers, avoiding contact with air.
When working with adhesive-sealant, the time for applying the silicone mass is limited. Usually this period is from several minutes to one hour before the formation of a surface film that impairs adhesion.
It is undesirable to use a one-component compound in closed volumes or apply in a thick layer, because. in this case, the curing period is significantly increased.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
