ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться
Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Materials for production and repairSoldering materials (solder, flux, braid)FluxFlux Application Accessories
 Materials for production and repairSoldering materials (solder, flux, braid)FluxLiquid flux, alcohol rosin
Код товара:
023240

Flux applicator BONPEN BON-102F wide

Marker for applying flux to PCB tracks before soldering. Multiple refueling. The tip is wide, wedge-shaped, 5 mm.
Flux applicator  BONPEN BON-102F wide
NOT available.
Expected price: 105,00 UAH
from 1 pc : 105,00 UAH
from 3 pcs : 101,80 UAH ( -3,0%)
from 5 pcs : 99,75 UAH ( -5,0%)
Prices are indicated at the time of product availability and may change upon receipt

Current balances:

NOT available

Изображение товара

Product description format_size zoom_out zoom_in

This flux applicator is a copy of the BONPEN product of the well-known manufacturer Japan Bonkote Co., Ltd. (Japan).
Testing revealed only one noticeable difference from the original - the thread between the two parts is slightly shorter, so the protective ring is not installed in the protective position.
The rest of the functional properties correspond to the original.
The flux-marker consists of two reservoirs: the main one, with a capacity of 7 ml, and the intermediate one. When refueling with flux, the main reservoir is filled. Slightly squeezing the side surfaces of the handle, we create pressure in the main tank, a small amount of flux flows through the dispensing hole into the auxiliary tank. Due to the capillary effect, the liquid continuously wets the brush.
Moreover, it may not necessarily be a flux - the applicator can be filled with various cleaning compounds or just alcohol. It can also be used not only for soldering operations, but also for work with fine mechanics and similar purposes for cleaning small parts. The tip is wedge-shaped, the width of the working part is 5 mm.
The advantage of using the BON-102 applicator in comparison with other methods of applying flux:
  • accurate accurate dosing, economical application of flux;
  • reusable, unlike single-use flux-markers with flux filling during production;
  • the flux solvent does not evaporate, so the concentration of the solution remains unchanged.

Предлагаемые замены

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

  • 1 11:13 24.01.2019 share

    чем размягчить кисть? у меня каменная, спирт налитый в колпачек кисть не размягчил ...

    Is the review helpful?
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав unknown

Buy with this product: Посмотреть больше…