The tape is used in making switching transformers and other inductive components to insulate windings and to hold split cores together.
Specifications:
adhesive type: acrylic
tape material: polyester
material thickness (mm): 0.055
color: yellow
operating temperature (°C): 130
initial dielectric strength (~kV): 5.5
long-term minimum breakdown voltage (~kV): 4.2
resistance (MOhm): >1000000
tensile strength (N/10 mm): 44
elongation (% at break): 100
adhesion to steel (N/10 mm): 3.8
tape roll length: (m): 66
tape width: 20 mm
Application recommendations:
Choosing the tape width for a specific bobbin and core:
for insulating windings - bobbin window width
for fixing parts of split cores - core width
Attention!
Do not use masking paper tape or standard PVC electrical tape to insulate enameled wire windings. Their adhesive damages the wire enamel over time.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown