The main feature of the "ROBOT-12" charger is an innovative system for intelligent selection and setting of the charging current throughout the entire charging cycle. This frees the user from the need to study battery characteristics and eliminates possible errors when adjusting the charging current.
"ROBOT-12" adjusts the charging current itself according to the actual remaining capacity of the battery and its behavior during charging; you only need to select the mode and connect a battery of any capacity - from 1 Ah to 200 Ah!
The “ROBOT-12” charger is designed to charge all types of 12-volt lead-acid batteries:
-
starter (flooded),
-
AGM,
-
gel (GEL),
-
and also for recovering (desulfating) batteries with liquid electrolyte, including calcium ones.
Thanks to its efficient charging and desulfation algorithm, ROBOT-12 can also be used:
-
for charging and maintaining batteries in optimal condition in float service (e.g. in backup power systems);
-
for long-term battery storage.
All operating modes are microcontroller-controlled and automatically adapt to each specific battery. Each mode includes device self-diagnostics, detection of short-circuited cells and battery overheating, and detection of incorrect connection.
“ROBOT-12” is small in size, weight and price, while meeting the needs of owners of 12-volt lead-acid batteries of almost all types and capacities. Thanks to these qualities, this device compares favorably with domestic and foreign analogs.
Main specifications:
-
Supply voltage, V 160 - 245
-
Supply voltage frequency, Hz 50 - 60
-
Maximum power consumption, W 200
-
Maximum charge current, A 12.5
-
Battery capacity, A*h 1 - 200
-
Maximum charge voltage, V:
-
- «GEL» mode 14.4
-
- «AGM» mode 14.9
-
- «Starter» mode 16.2
-
Protection types:
-
against reverse polarity;
-
against short circuit;
-
against high mains voltage;
-
against overheating
-
Ambient operating temperature, °C -20 ... +35
-
Dimensions L*W*H, mm 190*95*70
-
Weight, g 500
Package contents:
-
charger with power cable and battery connection cables - 1 pc
-
instructions - 1 pc
"ROBOT-12" is extremely easy to use - just connect the charger to the battery and select the battery type.
In addition to the main charging modes, "ROBOT-12" implements an algorithm for buffer (float) mode operation (for example, as part of a UPS), in which the charger monitors the battery condition around the clock and charges the battery when the voltage drops below the threshold level. This mode is switched on automatically after the main modes are completed; it can also be selected immediately after switching on the "ROBOT", bypassing the main modes.
For more detailed information on how "ROBOT-12" works, we recommend reading/downloading the manual.
Manufacturer's warranty 12 months.