Convenient small packaging for single use.
The sealant is designed to repair or replace almost all gaskets found in a car. It is used to repair and seal valve covers, oil pumps, water pumps, gearbox covers, differentials, intake manifolds, etc.
Characteristics:
• designed for use at temperatures up to 260°С
• allows to form a gasket up to 6 mm
• retains high elasticity and strength after hardening
• not subject to cracking and deformation during temperature cycles
• high adhesion to various materials
• does not collapse under the influence of oils, water, antifreeze, transmission fluids
• successfully withstands compression, tension and shear
Application:
1. Remove fragments of the old gasket and thoroughly clean the surface.
2. Remove the cap, pierce the protective foil and screw on the supplied tip.
3. Cut off the tip of the bit to create the desired hole.
4. Apply perimeter gasket sealant to the entire mating surface, forming a layer 2-3 mm thick. Leave holes for the mounting bolts.
5. Allow to dry for 10 minutes before assembling. Complete drying of the formed strip occurs in 24 hours.
When the sealant is opened for the first time, the transparent polymer may separate. Squeeze the contents out until smooth before applying to the surface.