JUFENG JF-4303 RA
Activated paste flux based on rosin (class RA).
For soldering with medium-melting lead-containing solders, as well as low-melting lead-free solders.
It is recommended to wash off flux residues after soldering.
The use of rosin fluxes without subsequent washing of residues is recommended for REA products that are operated in normal climatic conditions.
Type “RA” (rosin activated – activated rosin). This group of fluxes is intended for the industrial production of consumer electronic products. This type of flux is characterized by higher activity compared to fluxes of types “R” and “RMA”.
The slags of this flux are non-aggressive and non-conductive under normal operating conditions. When exposed to elevated ambient temperature and humidity (40 ±2°C; 90-95% relative humidity) for 96 hours, there are no signs of corrosion caused by flux slag. These factors make it possible to use it for assembling (soldering) many devices. If necessary, flux residues can be removed with special cleaners, alcohol-based products or gasoline.
Has increased temperature stability during the soldering process.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown