Semi-flowable silicone rubber K-5905L RTV has the same characteristics as K-5905 but a slightly lower viscosity, which makes it easier to apply and spread.
One-component RTV silicone compound.
Gel-like translucent mass.
Chemically neutral, acid-free, therefore does not cause corrosion of the bonded surfaces.
Good adhesion to metals, glass, plastic, wood.
Provides dielectric insulation and protects against aggressive environments.
Retains its mechanical and dielectric properties over a wide temperature range, from -50C to +250°C.
Non-flammable. Waterproof.
Recommended for sealing electronic components on boards, LED luminaire housings, car headlights.
Packaging: 45 gram tube.
Specifications:
|
UNCURED
|
Property Name
|
K-5905
|
K-5905L
|
|
Appearance
|
Translucent paste
|
Translucent
fluid
|
|
Density(g/cm3)
|
1.00~1.1
|
1.00~1.1
|
|
InitialCuringTime(25°C,min)
|
3~10
|
3~10
|
|
CURED
|
Mechanical
Properties
|
Tensile Strength
|
≥2.0
|
≥1.5
|
|
Elongation at Break (%)
|
200~300
|
200~300
|
|
Shear Strength
|
≥2.0
|
≥1.5
|
|
Hardness
(shore A)
|
25~30
|
25~30
|
|
Working Temp
(°C)
|
-50~250
|
-50~250
|
|
Electrical
Properties
|
Dielectric Strength(kv/mm)
|
≥20
|
≥20
|
|
Permittivity(@60Hz)
|
3.0
|
2.8
|
|
Volume Resistivity
(Ω.cm)
|
2.0×1015
|
2.0×1015
|
|
Packing Specification
|
45g/tube, 300ml/tube
|
Usage guidelines
Single-component silicone compounds cure by reacting with moisture in the air. They cure well at room temperature at relative humidity from 30% to 80%. About 90% of their physical property values is reached within 24 to 72 hours. Curing can be accelerated by slight heating, not above 60 °C.
Silicone sealants must be stored in sealed containers, with no contact with air.
When working with sealant, the time to apply the silicone is limited, usually from a few minutes to an hour before a surface skin forms that impairs adhesion.
One-part compound should not be used in enclosed volumes or applied in a thick layer, as curing then takes much longer.