Temperature-controlled soldering iron CXG936d-CV [220V, 60W, 900M tip]
Microprocessor control, LED display. 220V, 60W. 900M tips, PTC heater. Soldering station functionality in a soldering iron handle! Version without sleep timer.
This modification of the soldering iron differs from the basic model CXG936d no sleep timer mode (i.e. switching to standby after prolonged inactivity).
Only two differences from a conventional stationary soldering station: the soldering iron heater is powered by mains voltage, and compactness. The usual control unit is absent; the board with the display is located right in the soldering iron handle.
The other specifications fully match “station” ones -
temperature shown on LED display
button control (two buttons on the soldering iron handle)
stores the preset temperature
tip temperature correction (when measured with an external thermometer)
PID control algorithm, precise temperature holding
PTC ceramic heater with integrated resistive temperature sensor
tips of the series 900M (as with most popular soldering stations)
ESD compliant
Add to this a fairly flexible power cord with a three-pin Euro plug (cord length 1.4 m - not a stub at all;-), as well as a very ergonomic handle with a silicone overlay in the grip area.
Of course, the handle diameter is slightly larger than that of a standard 907 soldering iron, at 19.5 mm. After all, the control board has to fit inside the handle somehow…
The plastic of the handle and front nut is non-flammable.
Heater power is switched by a triac via an opto-thyristor.
Total soldering iron length 220 mm.
The soldering iron does not fully replace a bench soldering station, but in many cases it is a worthy alternative, and given its compatibility in tip size it is useful as an extra tool for field work.
The basic set includes a thin needle-shaped tip with a needle tip radius of 0.4 mm.
Specifications:
supply voltage: 220V, 50Hz
power (max): 60W
temperature adjustment range: 80°C - 450°C
display backlight: no
password setting: no
heater type: PTC ceramic
tip type: 900M
heater diameter: 3.8 mm
soldering iron length: 220 mm
power cord length: 1.4 m
ground connection: yes
Contents:
soldering iron assembly: 1 pc
instructions in English - 1 pc
All soldering irons are tested before sale.
The soldering iron warranty is 3 months.
The warranty does not cover heating elements and soldering tips, which are consumables.
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown