Fast-curing two-part structural acrylic adhesive. Viscous, can be used on vertical surfaces.
For bonding metal, ceramics, wood, glass, crystal and composite materials.
Resistant to air, water and oils.
The bond is elastic enough to withstand shock loads, vibration and thermal expansion of the joined parts.
Can be used for assembling plastic panels, oil pumps, water pumps, bumpers, dashboards, industrial tanks and pipes in cars and agricultural machinery.
Can bond poorly degreased surfaces.
Wide operating temperature range. from -60°C to +200°C.
Suitable for bonding with a maximum gap of 0.5 mm; with an activator it can fill gaps up to 1 mm. Not recommended for bonding greasy plastics, i.e. polyolefins (PP, PE, Teflon, silicone rubber, etc.)
Store in a dry cool place at 8°C — 30°C.
Specifications:
-
component A color: light green
-
component B color: light pink
-
viscosity (cps, 25°C): A: 4000±500, B: 4000±500
-
setting time: 5-10 minutes (at a temperature of at least 25°C)
-
time to handling strength: 10-30 minutes.
-
time to full strength: 24 hours
-
tensile strength (steel × steel): >18 mpa
-
impact strength (kJ / m3): >10
-
gap filled: 0.05 – 0.5 mm.
-
operating temperature range: from –60°C to +200°C
-
packaging: 2 tubes in a blister
-
weight: 70 grams
Usage recommendations:
To start curing, mix adhesive components A and B in a 1:1 ratio. Note that the mixture must be used within 1-2 minutes, before it begins to set.
Apply the mixture to the surfaces to be bonded, then press the surfaces together.
Surfaces must be cleaned and degreased beforehand.