Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Waterproof silicone-based protective heat-resistant coating with good dielectric properties.
Designed for use in microelectronics for rigid and flexible printed circuit boards, as well as other components and parts exposed to high temperatures during operation.
Retains its effectiveness up to+500°С. The coating is flame retardant, complies with UL94.
The varnish is flexible and has good adhesion.
Excellent protection of components from moisture, dampness, salt, mold and corrosive fumes.
The high heat resistance of the varnish significantly expands the range of applications: in addition to electronics, it can also be used for protective and decorative purposes to cover elements of stoves, fireplaces, engine exhaust manifolds.
Characteristics:
appearance: transparent yellowish liquid
density at 25°С: 1.04 g/cm3
heat resistance: -45°С -+500°С
viscosity at 23°С: 220-330 mPa
content of non-volatile substances: 50%
surface resistance: (DIN53483) 7,5 × 1016Ω cm
dielectric constant: ( DIN53483): 3.09
dielectric strength: (DIN53481): 110kV/mm
packaging: aerosol 200 ml.
Purpose
Used to insulate PCBs exposed to impact high temperatures during operation, for example, in vehicle engines, aviation and aerospace engineering. It is also used for insulation of communication equipment, measuring instruments, in shipbuilding, power engineering and heavy industry.
The high elasticity and resistance to sudden changes in temperature of ISOTEMP varnish allow it to be used for impregnating windings of transformers and electric motors operating in harsh operating conditions (e.g. circulating pumps with heating systems).
Recommended use
Shake well before use. The surface to be treated must be cleaned and degreased. Apply the aerosol by spraying from a distance of approximately 30 cm, otherwise drips may form on the surface. The resulting layer dries until it is tacky within one or two hours and fully cures after 24 hours.
The spray head of the aerosol is self-cleaning. If it gets clogged, clean it with ISOTEMP Thinner .
Caution To achieve maximum electrical and mechanical performance, the coating should be heat treated for one hours at 200°C.
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown
Техническое описание
Описание на сайте производителя (на английском)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
.jpg)
