Silicone sealant adhesive Kafuter K-704 RTV 45g WHITE
One-component RTV silicone compound.
White viscous mass.
Chemically neutral, acid-free, therefore does not cause corrosion of the bonded surfaces.
Good adhesion to metals, glass, plastic, wood.
Provides dielectric insulation and protects against aggressive environments.
Retains its mechanical and dielectric properties over wide temperature ranges, from -60C to +200°C.
Non-flammable. Waterproof.
Application: moisture (oil) protection of electronic and electrical devices over a wide temperature range, including bonding and sealing of LED products.
Retains elasticity, high adhesion and water resistance at low and high temperatures. Accordingly, it is recommended for use in various climate equipment (air conditioners, refrigerators, freezers, ventilation systems, water heaters).
Packaging: 45 gram tube.
Specifications:
-
color: white
-
drying time: (25°) ≤10 min.
-
dielectric constant,kv/mm: ≥15
-
hardness (Shore A): 30-40;
-
tensile strength: ≥1.0 MPa
-
shear strength: ≥0.8 MPa
Recommendations for use
One-component silicone compounds cure by reacting with moisture in the air. They cure well at room temperature within a relative humidity range of 30% to 80%. About 90% of their physical properties are reached within 24 to 72 hours. Curing can be accelerated by slight heating, not exceeding 60 °C.
Silicone sealants must be stored in sealed containers, with no contact with air.
When working with sealant, the time to apply the silicone is limited, usually from a few minutes to an hour before a surface skin forms that impairs adhesion.
One-part compound should not be used in enclosed volumes or applied in a thick layer, as curing then takes much longer.